Double guides for middle shelves

The guide for shelves with a door above and below. It is the bottom guide of one opening and the top guide of the other in a single part: on top it has the shallow channel the upper door rests in, and underneath the deep channel the lower door lifts into. It grips the shelf edge with both jaws, so it doesn't clash with another guide and both doors are held in the same place, using considerably less plastic than two separate guides.

Upload a file to view it here

Drag to rotate · wheel to zoom · Shift or right-click to pan

Generating your part

Part dimensions

Adjust the dimensions and check them in the 3D view.

Part dimensions

Adjust the dimensions and check them in the 3D view.

Where the doors runIt must match the option you chose when ordering the panels, above and below.

Middle shelf thickness (mm)de 6 a 60

Acrylic (PMMA) thickness (mm)de 2 a 8

Width of each guide (mm)de 20 a 90

Depth (mm)de 12 a 90

Guides on the shelfThe same number as each track of your doors has.

Technical settingsHow far back this shelf is set: 0 mm

How far back this shelf is set (mm)de 0 a 30

Material and quality

The material determines which colours are available, so it comes first.

Material and quality

The material determines which colours are available, so it comes first.

Material

QualityThis is the height of each plastic layer.

Infill

Colours

The text is raised and printed in its colour, not painted.

Colours

The text is raised and printed in its colour, not painted.

Colour

Quantity and lead time

Units

Save or share

Estimated delivery in 3 working days from payment confirmation.

About this part

It goes on shelves with a door above and below. On top it has the shallow channel the upper door rests in; underneath, the deep channel the lower door lifts into.
One strip is for ONE shelf. For a column of openings, order the standard guide set (for the bottom shelf and the top shelf) and as many strips as there are middle shelves.
The doors above and below must be mounted the same way: all in front or all flush.
In the preview they are shown lying on their sides because that's how they print: every layer has the same outline, with no supports at all.
Measure the shelf edge before ordering. If the clip is loose, reduce the value you enter by 0.2 mm; if it won't go on, increase it.
You do not need to upload a file: we generate it from your details.

Double guides for middle shelves · in front

Generating the part...