FDM additive manufacturing
Workshop-quality 3D printing, not garage printing
We manufacture with high-end printers: enclosed chamber, automatic first-layer calibration and a hardened-steel nozzle. That means we can print anything from decorative PLA to polycarbonate or engineering polyamide with the same reliability.
- From 1 unit, no minimum quantity
- From decorative PLA to engineering nylon
- Multicolour with 4-channel AMS
- 24 h manufacturing if you're in a hurry
What the workshop can do
We use high-end enclosed printers. We assign the right machine to each part based on what it needs; you do not have to choose anything.
Up to 256 x 256 x 256 mm
In one part. If it does not fit, we make it in sections with a joint, and we tell you before charging you.
Enclosed chamber
This is what lets us print ABS, ASA, polycarbonate and nylon without cracking as they cool.
Hardened nozzle
Handles abrasive materials such as carbon fibre, wood-filled PLA or metal-filled filament.
Multicolour and soluble supports
Several spools loaded at once: multicolour parts and supports that dissolve in water.
Layer heights
This is the thickness of each line deposited by the printer. The finer it is, the better the finish and the less visible the layers; in return, the part takes longer and costs more. If you are not sure, standard is the best choice for almost everything.
Borrador 0,28 mm
Capa gruesa y visible. La opción más económica para validar forma y encaje.
Estándar 0,20 mm
Nuestro equilibrio recomendado entre precio, resistencia y acabado.
Recommended
Fina 0,16 mm
Líneas de capa poco perceptibles. Recomendada para piezas vistas.
Ultrafina 0,12 mm
Máximo detalle en curvas y texturas finas, para piezas que se miran de cerca. Es la más cara.
Internal infill
No part is printed solid unless you ask for it: inside, it uses a lattice that adds stiffness with very little material, which keeps the price down. More infill means more strength, but also more material and more machine hours, and very few parts need the maximum.
15 % ligero
Piezas decorativas y maquetas sin exigencia mecánica.
25 % estándar
Uso general. Buena relación resistencia / peso / precio.
40 % resistente
Piezas funcionales con carga moderada.
60 % robusto
Utillaje y piezas sometidas a esfuerzo continuo.
100 % macizo
Máxima resistencia. La más cara: solo compensa en piezas que van a sufrir de verdad.
Materials
Industrial-grade filament with diameter tolerance controlled batch by batch. That is what lets us give reliable time and weight figures in the quote.
| Material | Family | Density | Service temp. | Tensile strength | Notes |
|---|---|---|---|---|---|
| PLA | PLA | 1.24 g/cm³ | 55 °C | 62 MPa | |
| PLA alta resistencia | PLA | 1.24 g/cm³ | 95 °C | 70 MPa | |
| PLA Mate | PLA | 1.24 g/cm³ | 55 °C | 46 MPa | |
| PLA Basic | PLA | 1.24 g/cm³ | 52 °C | 42 MPa | |
| PLA Reciclado | PLA | 1.24 g/cm³ | 55 °C | 55 MPa | |
| PLA Silk | PLA | 1.24 g/cm³ | 55 °C | 48 MPa | |
| PLA Madera | PLA | 1.28 g/cm³ | 55 °C | 40 MPa | Abrasive |
| PLA Marmol | PLA | 1.32 g/cm³ | 55 °C | 45 MPa | Abrasive |
| PLA Glitter | PLA | 1.25 g/cm³ | 55 °C | 48 MPa | Abrasive |
| PLA Fluorescente (glow in the dark) | PLA | 1.26 g/cm³ | 55 °C | 42 MPa | Abrasive |
| PLA Metalizado | PLA | 1.30 g/cm³ | 55 °C | 50 MPa | Abrasive |
| PETG | PETG | 1.27 g/cm³ | 75 °C | 50 MPa | OutdoorFood contact |
| ABS-E | ABS | 1.04 g/cm³ | 98 °C | 42 MPa | Enclosed chamber |
| ASA | ASA | 1.07 g/cm³ | 100 °C | 45 MPa | OutdoorEnclosed chamber |
| TPU 95A Flex | TPU | 1.21 g/cm³ | 60 °C | 35 MPa | Outdoor |
| Nylon PA | PA | 1.14 g/cm³ | 105 °C | 70 MPa | Enclosed chamber |
| PLA Fibra de Carbono | PLA | 1.24 g/cm³ | 60 °C | 78 MPa | Abrasive |
| HIPS | HIPS | 1.04 g/cm³ | 88 °C | 32 MPa | Enclosed chamber |
| Policarbonato (PC) | PC | 1.20 g/cm³ | 115 °C | 65 MPa | Enclosed chamber |
| PVA (soporte soluble en agua) | PVA | 1.23 g/cm³ | — | — |
The service-temperature and tensile-strength figures are the manufacturer's values from standard test specimens. A printed part is anisotropic: it is considerably weaker in the layer direction. If your part will carry a load, tell us and we will recommend orientation and infill.
Get your price before you finish reading this
File analysis happens in your own browser, so the price appears as soon as you drop in the STL. No need to register or leave your email.
Configure my part