Displays and POS
Countertop stands, display cases, leaflet holders and plinths. 3 mm is enough for small parts; from A4 size upwards we recommend 5 mm.
Custom laser cutting: acrylic (PMMA) and wood
We cut the sheet to the exact size you ask for, with holes and cutouts where you need them. Choose the thickness and finish, tell us the dimensions and you'll see the price on screen straight away.
Any size up to 1,000 × 600 mmIn MDF (fibreboard), up to 800 × 400 mmFrom a single partLaser-finished edge, no further finishing
10 sheets
Clear extruded acrylic (PMMA)
3 thicknesses · 2 colours€2.72 VAT incl. · 20 × 20 cm
Clear cast acrylic (PMMA)
Clear, in seven thicknesses
7 thicknesses · 1 colour€3.45 VAT incl. · 20 × 20 cm
MDF (fibreboard)
The low-cost material for models, signs and decoration
€3.75 VAT incl. · 20 × 20 cm
Tinted acrylic (PMMA)
Transparent colour, in nine shades
1 thickness · 9 colours€3.93 VAT incl. · 20 × 20 cm
Opal acrylic (PMMA)
White that lets light through and hides the LEDs
1 thickness · 1 colour€3.93 VAT incl. · 20 × 20 cm
Coloured acrylic (PMMA)
Opaque and opal, in fifteen colours
2 thicknesses · 15 colours€3.93 VAT incl. · 20 × 20 cm
Fluorescent acrylic (PMMA)
The edge glows, with no light behind it
1 thickness · 4 colours€4.05 VAT incl. · 20 × 20 cm
Mirror acrylic (PMMA)
Reflects like a mirror, weighs half as much and doesn't shatter
1 thickness · 2 colours€5.08 VAT incl. · 20 × 20 cm
Matt acrylic (PMMA)
Satin on both sides or just one: no glare and no fingerprints
1 thickness · 7 coloursPrice on request
Chemical-resistant acrylic (PMMA)
Stands up to perfume, creams and cleaners without crazing
1 thickness · 3 coloursPrice on request
Prices are for one 20 × 20 cm part with no holes or cutouts, so you can compare finishes. The price for your actual size appears in the configurator, and drops significantly from 5 units upwards.
What it's used for
Plinths and supports
Bases for displaying products, stands and dividers. With acrylic (PMMA), the glossy laser-cut edge looks finished without polishing.
Guards and screens
Counter screens, machine guards and dividers. Always in 5 mm, with holes and spacers if you need them.
Models and prototypes
Templates, light tooling and architectural models. The half-millimetre tolerance allows press-fit joints.
Reviews
What our customers say
5.0
7 reviews
Only people who have received an order from us can leave a review.
Read the reviews- September 2026
PERFECCIÓN
Ha sido un servicio perfecto. - Súper rápido el envío - Muy bien empaquetado - Estado perfecto - Medidas exactas y donde tocan.
- September 2026
Perfecta
Sólo pedí una pieza de prueba y quedó exactamente igual que el diseño original, el acabado también fue muy bueno, sin duda les pediré cada pieza del proyecto que estoy desarrollando antes de empezar a producirlo. (Es la pieza blanca que muestro en la foto, la otra pieza es con otro proveedor que me dio peor acabado)
- September 2026
Pedi 5 piezas de metraquilatro de 3 mm, para cerrar mi impresora 3d Elegoo Centauri Carbón con sistema Canvas y va genial, ahora ya se pude imprimir con filamento ABS sin problemas, de maravillas con ustedes
Before ordering, keep this in mind
The edge comes ready from the laser
On acrylic (PMMA) it comes out glossy straight from the cut, with no polishing. On MDF it comes out toasted: that's the normal finish of the board, not a defect.
Prepare the vector file properly
Lines are cut and, in SVG, black fills are engraved in a single shade. Convert text to curves and work in millimetres at 1:1 scale.
Holes too close together weaken the part
Leave at least twice the material thickness between a hole and the edge. Otherwise, the part can break during handling.
3 mm flexes in larger sizes
Above A4 portrait size without support, move up to 5 mm. We warn you automatically in the configurator.
Protective film on acrylic (PMMA)
Acrylic (PMMA) arrives with film on both sides: remove it just before installation to avoid scratches during assembly. MDF doesn't have film.
Acrylic (PMMA) isn't glass
It weighs about half as much and resists impact much better, but it scratches more easily. Clean it with soapy water, never alcohol or ammonia.