Extruded acrylic (PMMA)
Clear extruded acrylic (PMMA) 3 mm
Cannot see the combination you need? See all Clear extruded acrylic (PMMA) options
Extruded, the easiest to bond
It costs less than cast and adhesive bites into it faster: it's what we use for display cases, covers and boxes. The trade-off is that it isn't the right choice for drilling or tapping.
Cut to the exact size
Any size up to 1000 × 600 mm with a tolerance of ±0.5 mm. No surcharge for unusual dimensions.
Much safer than glass
Ten times more impact resistant and half the weight. If it does break, it does not create sharp shards.
Protected all the way to your workbench
Film on both sides, rigid packaging with corner protectors and delivery in 24-72 h to mainland Spain.
Technical data
Download as PDF- Type
- Extruded (PMMA XT)
- Nominal thickness
- 3 mm
- Thickness tolerance
- ±0.30 mm
- Sheet size
- 1000 × 600 mm
- Colour
- Clear (transparent)
- Light transmittance
- 92 %
- Density
- 1.19 g/cm³
- Weight per m²
- 3.57 kg
- Service temperature
- up to 80 °C
- Forming temperature
- 150 - 170 °C
- Impact resistance
- 10 times that of glass
- Cutting speed
- 24 mm/s
What to use 3 mm for
Counter displays
Up to A4. Lightweight, economical and sufficient when the part is supported by a base.
Plinths and supports
Display bases, lecterns and dividers with a glossy cut edge.
Templates and tooling
Cutting guides, paint masks and hole templates.
Back panels and dividers
Display-case backs, drawer dividers and decorative panels.
Indicative prices
Simple rectangle, one unit, no holes or cutouts, standard lead time and VAT included. Bear in mind that the unit price drops considerably from 5 units onwards.
| Size | Surface area | 1 unit | 10 units |
|---|---|---|---|
| 100 × 100 mm | 100 cm² | €1.82€1.50 excluding VAT | €1.63 /unit |
| 200 × 200 mm | 400 cm² | €3.69€3.05 excluding VAT | €3.32 /unit |
| 210 × 297 mm | 624 cm² | €5.08€4.20 excluding VAT | €4.57 /unit |
| 300 × 200 mm | 600 cm² | €4.96€4.10 excluding VAT | €4.46 /unit |
| 500 × 400 mm | 2,000 cm² | €13.13€10.85 excluding VAT | €11.82 /unit |
| 800 × 500 mm | 4,000 cm² | €24.44€20.20 excluding VAT | €22.00 /unit |
How we make it
Automatic nesting
You only pay for the surface area your part uses.
Cut at a calibrated speed
For 3 mm we cut at 24 mm/s. Faster would leave a rough edge; slower would burn it.
Part-by-part inspection
We measure critical dimensions, check for burn marks and reapply film before packing.