Cast acrylic (PMMA)

Green opal acrylic (PMMA) 3 mm

Thickness · 3 mm

3 mm 5 mm

Colour · Green

Yellow Blue Navy blue Dark blue White Opaque white Grey Magenta Orange Black Red Carmine red Dark red Green Dark green

Cannot see the combination you need? See all Coloured acrylic (PMMA) options

Opal coloured acrylic (PMMA): lit from the front it shows a flat colour and hides what is behind it, and with an LED behind it, it glows in its own colour. For backlit signs, light boxes and signage. Made from 100 % recycled acrylic; it cuts with a glossy edge in the same colour.

Cast, not extruded

Higher molecular weight: it cuts without internal stress, does not crack when drilled and comes off the laser with a glossy edge.

Cut to the exact size

Any size up to 1000 × 600 mm with a tolerance of ±0.5 mm. No surcharge for unusual dimensions.

Much safer than glass

Ten times more impact resistant and half the weight. If it does break, it does not create sharp shards.

Protected all the way to your workbench

Film on both sides, rigid packaging with corner protectors and delivery in 24-72 h to mainland Spain.

Technical data

Download as PDF

Type: Cast (PMMA GS)
Nominal thickness: 3 mm
Thickness tolerance: ±0.70 mm
Sheet size: 1000 × 600 mm
Colour: Green (translucent)
Surface finish: Gloss
Light transmittance: 5 %
Density: 1.19 g/cm³
Weight per m²: 3.57 kg
Recycled content: 100 %
Service temperature: up to 80 °C
Heat deflection temperature: 102 °C
Forming temperature: 130 - 190 °C
Impact resistance: 10 times that of glass
Fire behaviour: UL94 HB · EN 13501-1 E
Protective film: Suitable for laser cutting
Cutting speed: 22 mm/s

What to use 3 mm for

Counter displays

Up to A4. Lightweight, economical and sufficient when the part is supported by a base.

Plinths and supports

Display bases, lecterns and dividers with a glossy cut edge.

Templates and tooling

Cutting guides, paint masks and hole templates.

Back panels and dividers

Display-case backs, drawer dividers and decorative panels.

Indicative prices

Simple rectangle, one unit, no holes or cutouts, standard lead time and VAT included. Bear in mind that the unit price drops considerably from 5 units onwards.

Size	Surface area	1 unit	10 units
100 × 100 mm	100 cm²	€1.82€1.50 excluding VAT	€1.63 /unit
200 × 200 mm	400 cm²	€3.93€3.25 excluding VAT	€3.54 /unit
210 × 297 mm	624 cm²	€5.45€4.50 excluding VAT	€4.90 /unit
300 × 200 mm	600 cm²	€5.26€4.35 excluding VAT	€4.74 /unit
500 × 400 mm	2,000 cm²	€14.10€11.65 excluding VAT	€12.69 /unit
800 × 500 mm	4,000 cm²	€26.26€21.70 excluding VAT	€23.63 /unit