ASA
ASA
The outdoor evolution of ABS: it keeps its colour and mechanical properties after years of sun exposure, where ABS yellows and becomes brittle. It is the material we choose for any part that will live permanently outdoors.
What we use it for
Requires an enclosed chamber
This material shrinks as it cools and would lift off the build plate in an open printer. We always manufacture it on the X1 Carbon with the top and door fitted, at no extra cost to you.
Technical data
- Family
- ASA
- Density
- 1.07 g/cm³
- Service temperature
- 100 °C
- Tensile strength
- 45 MPa
- Filament diameter
- 1,75 mm
- Suitable for outdoor use
- Yes, UV resistant
- Food contact
- No
- Enclosed chamber
- Required
- Hardened nozzle
- Not required
- Process waste
- 9 %
- Colours in stock
- 4
Mechanical values are the manufacturer's measurements from standard test specimens. A printed part is noticeably weaker in the direction perpendicular to the layers.
Available colours
Black
No surcharge
White
No surcharge
Grey
No surcharge
Red
No surcharge
Price by quality
Reference based on a standard part: a hollow 50 mm cube (24.6 cm³ of material), 25% infill, one unit, standard lead time, VAT included.
| Quality | Weight | Machine time | Price |
|---|---|---|---|
| Borrador 0,28 mm2 perimeters | 25.5 g | 27 min | €29.22€24.15 excluding VAT |
| Estándar 0,20 mm3 perimeters | 28.7 g | 44 min | €31.52€26.05 excluding VAT |
| Fina 0,16 mm3 perimeters | 27.9 g | 53 min | €32.67€27.00 excluding VAT |
| Ultrafina 0,12 mm4 perimeters | 28.7 g | 1 h 11 min | €35.03€28.95 excluding VAT |