PETG
PETG
The balance between easy printing and performance. It resists moisture, UV and many chemicals, does not become brittle over time and withstands around 75 C. It is our default recommendation for any part that will be outdoors or in contact with water.
What we use it for
Outdoor partsContact with liquidsEnclosures and guardsFunctional replacement parts
Technical data
- Family
- PETG
- Density
- 1.27 g/cm³
- Service temperature
- 75 °C
- Tensile strength
- 50 MPa
- Filament diameter
- 1,75 mm
- Suitable for outdoor use
- Yes, UV resistant
- Food contact
- Yes, certified material
- Enclosed chamber
- Not required
- Hardened nozzle
- Not required
- Process waste
- 6 %
- Colours in stock
- 7
Mechanical values are the manufacturer's measurements from standard test specimens. A printed part is noticeably weaker in the direction perpendicular to the layers.
Available colours
Clear
No surcharge
Black
No surcharge
White
No surcharge
Translucent red
No surcharge
Translucent blue
No surcharge
Translucent green
No surcharge
Translucent orange
No surcharge
Price by quality
Reference based on a standard part: a hollow 50 mm cube (24.6 cm³ of material), 25% infill, one unit, standard lead time, VAT included.
| Quality | Weight | Machine time | Price |
|---|---|---|---|
| Borrador 0,28 mm2 perimeters | 29.5 g | 22 min | €28.68€23.70 excluding VAT |
| Estándar 0,20 mm3 perimeters | 33.1 g | 35 min | €30.55€25.25 excluding VAT |
| Fina 0,16 mm3 perimeters | 32.2 g | 43 min | €31.52€26.05 excluding VAT |
| Ultrafina 0,12 mm4 perimeters | 33.1 g | 57 min | €33.40€27.60 excluding VAT |