TPU
TPU 95A Flex
95 Shore A elastomer: flexible, elastic and with excellent abrasion and tear resistance. Its nature means it prints slowly, which makes large parts more expensive, but there is no substitute when the part needs to deform and spring back.
What we use it for
Seals and bump stopsCovers and protectorsAnti-vibration dampingWheels and rollers
Technical data
- Family
- TPU
- Density
- 1.21 g/cm³
- Service temperature
- 60 °C
- Tensile strength
- 35 MPa
- Filament diameter
- 1,75 mm
- Suitable for outdoor use
- Yes, UV resistant
- Food contact
- No
- Enclosed chamber
- Not required
- Hardened nozzle
- Not required
- Process waste
- 10 %
- Colours in stock
- 5
Mechanical values are the manufacturer's measurements from standard test specimens. A printed part is noticeably weaker in the direction perpendicular to the layers.
Available colours
Black
No surcharge
White
No surcharge
Red
No surcharge
Blue
No surcharge
Natural translucent
No surcharge
Price by quality
Reference based on a standard part: a hollow 50 mm cube (24.6 cm³ of material), 25% infill, one unit, standard lead time, VAT included.
| Quality | Weight | Machine time | Price |
|---|---|---|---|
| Borrador 0,28 mm2 perimeters | 29.2 g | 1 h | €33.52€27.70 excluding VAT |
| Estándar 0,20 mm3 perimeters | 32.7 g | 1 h 39 min | €38.60€31.90 excluding VAT |
| Fina 0,16 mm3 perimeters | 31.8 g | 1 h 59 min | €41.26€34.10 excluding VAT |
| Ultrafina 0,12 mm4 perimeters | 32.7 g | 2 h 40 min | €46.59€38.50 excluding VAT |